*nvim-tree.lua* A file explorer written in lua

Minimum version of neovim: 0.6.0

Author: Yazdani Kiyan <yazdani.kiyan@protonmail.com>

==============================================================================
INTRODUCTION                                       *nvim-tree-introduction*

This file explorer requires `neovim >= 0.6.0`

==============================================================================
QUICK START                                        *nvim-tree-quickstart*

open the tree with :NvimTreeToggle
>
  nnoremap <C-n> :NvimTreeToggle<CR>
  lua require 'nvim-tree'.toggle()
<

==============================================================================
COMMANDS                                           *nvim-tree-commands*

|:NvimTreeOpen| 	                                  *:NvimTreeOpen*

opens the tree. Takes an optional path argument.

|:NvimTreeClose| 	                          *:NvimTreeClose*

closes the tree

|:NvimTreeToggle| 	                          *:NvimTreeToggle*

open or close the tree. Takes an optional path argument.

|:NvimTreeFocus| 	                          *:NvimTreeFocus*

open the tree if it is closed, and then focus on the tree

|:NvimTreeRefresh|			          *:NvimTreeRefresh*

refresh the tree

|:NvimTreeFindFile|				  *:NvimTreeFindFile*

The command will change the cursor in the tree for the current bufname.

It will also open the leafs of the tree leading to the file in the buffer
(if you opened a file with something else than the NvimTree, like `fzf` or
`:split`)

|:NvimTreeFindFileToggle|			  *:NvimTreeFindFileToggle*

close the tree or change the cursor in the tree for the current bufname,
similar to combination of |:NvimTreeToggle| and |:NvimTreeFindFile|. Takes an
optional path argument.

|:NvimTreeClipboard|			          *:NvimTreeClipboard*

Print clipboard content for both cut and copy

|:NvimTreeResize|			          *:NvimTreeResize*

Resize the NvimTree window to the given size. Example: `:NvimTreeResize 50`
resizes the window to the width of 50. If the size starts with "+" or "-" it
adds or removes the given value to the current window width.
Example `:NvimTreeResize -20` removes the value 20 from the current width. And
`:NvimTreeResize +20` adds the value 20 to the current width.

|:NvimTreeCollapse|			          *:NvimTreeCollapse*

Collapses the nvim-tree recursively.

|:NvimTreeCollapseKeepBuffers|		          *:NvimTreeCollapseKeepBuffers*

Collapses the nvim-tree recursively, but keep the directories open, which are
used in an open buffer.


==============================================================================
SETUP                                *nvim-tree.setup*

To configure the tree (and make it runnable), you should call the setup
function.

Values may be functions. Warning: this may result in unexpected behaviour.
>
    require("nvim-tree").setup { -- BEGIN_DEFAULT_OPTS
      auto_reload_on_write = true,
      create_in_closed_folder = false,
      disable_netrw = false,
      hijack_cursor = false,
      hijack_netrw = true,
      hijack_unnamed_buffer_when_opening = false,
      ignore_buffer_on_setup = false,
      open_on_setup = false,
      open_on_setup_file = false,
      open_on_tab = false,
      sort_by = "name",
      update_cwd = false,
      reload_on_bufenter = false,
      respect_buf_cwd = false,
      view = {
        width = 30,
        height = 30,
        hide_root_folder = false,
        side = "left",
        preserve_window_proportions = false,
        number = false,
        relativenumber = false,
        signcolumn = "yes",
        mappings = {
          custom_only = false,
          list = {
            -- user mappings go here
          },
        },
      },
      renderer = {
        add_trailing = false,
        group_empty = false,
        highlight_git = false,
        highlight_opened_files = "none",
        root_folder_modifier = ":~",
        indent_markers = {
          enable = false,
          icons = {
            corner = "└ ",
            edge = "│ ",
            none = "  ",
          },
        },
        icons = {
          webdev_colors = true,
          git_placement = "before",
          padding = " ",
          symlink_arrow = " ➛ ",
          show = {
            file = true,
            folder = true,
            folder_arrow = true,
            git = true,
          },
          glyphs = {
            default = "",
            symlink = "",
            folder = {
              arrow_closed = "",
              arrow_open = "",
              default = "",
              open = "",
              empty = "",
              empty_open = "",
              symlink = "",
              symlink_open = "",
            },
            git = {
              unstaged = "✗",
              staged = "✓",
              unmerged = "",
              renamed = "➜",
              untracked = "★",
              deleted = "",
              ignored = "◌",
            },
          },
        },
        special_files = { "Cargo.toml", "Makefile", "README.md", "readme.md" },
      },
      hijack_directories = {
        enable = true,
        auto_open = true,
      },
      update_focused_file = {
        enable = false,
        update_cwd = false,
        ignore_list = {},
      },
      ignore_ft_on_setup = {},
      system_open = {
        cmd = "",
        args = {},
      },
      diagnostics = {
        enable = false,
        show_on_dirs = false,
        icons = {
          hint = "",
          info = "",
          warning = "",
          error = "",
        },
      },
      filters = {
        dotfiles = false,
        custom = {},
        exclude = {},
      },
      git = {
        enable = true,
        ignore = true,
        timeout = 400,
      },
      actions = {
        use_system_clipboard = true,
        change_dir = {
          enable = true,
          global = false,
          restrict_above_cwd = false,
        },
        open_file = {
          quit_on_open = false,
          resize_window = true,
          window_picker = {
            enable = true,
            chars = "ABCDEFGHIJKLMNOPQRSTUVWXYZ1234567890",
            exclude = {
              filetype = { "notify", "packer", "qf", "diff", "fugitive", "fugitiveblame" },
              buftype = { "nofile", "terminal", "help" },
            },
          },
        },
      },
      trash = {
        cmd = "trash",
        require_confirm = true,
      },
      live_filter = {
        prefix = "[FILTER]: ",
        always_show_folders = true,
      },
      log = {
        enable = false,
        truncate = false,
        types = {
          all = false,
          config = false,
          copy_paste = false,
          diagnostics = false,
          git = false,
          profile = false,
        },
      },
    } -- END_DEFAULT_OPTS
<

Here is a list of the options available in the setup call:

*nvim-tree.disable_netrw*
Completely disable netrw
  Type: `boolean`, Default: `false`

*nvim-tree.hijack_netrw*
Hijack netrw windows (overriden if |disable_netrw| is `true`)
  Type: `boolean`, Default: `true`

*nvim-tree.open_on_setup*
Will automatically open the tree when running setup if startup buffer is
a directory, is empty or is unnamed. nvim-tree window will be focused.
  Type: `boolean`, Default: `false`

*nvim-tree.open_on_setup_file*
Will automatically open the tree when running setup if startup buffer is a file.
File window will be focused.
File will be found if update_focused_file is enabled.
  Type: `boolean`, Default: `false`

*nvim-tree.ignore_buffer_on_setup*
Will ignore the buffer, when deciding to open the tree on setup.
  Type: `boolean`, Default: `false`

*nvim-tree.ignore_ft_on_setup*
List of filetypes that will make `open_on_setup` not open.
You can use this option if you don't want the tree to open
in some scenarios (eg using vim startify).
  Type: {string}, Default: {}

*nvim-tree.auto_reload_on_write*
Reloads the explorer every time a buffer is written to.
  Type: `boolean`, Default: `true`

*nvim-tree.create_in_closed_folder*
Creating a file when the cursor is on a closed folder will set the
path to be inside the closed folder, otherwise the parent folder.
  Type: `boolean`, Default: `false`

*nvim-tree.open_on_tab*
Opens the tree automatically when switching tabpage or opening a new tabpage
if the tree was previously open.
  Type: `boolean`, Default: `false`

*nvim-tree.sort_by*
Changes how files within the same directory are sorted.
Can be one of 'name', 'case_sensitive', 'modification_time' or 'extension'.
  Type: `string`, Default: `"name"`

*nvim-tree.hijack_unnamed_buffer_when_opening*
Opens in place of the unnamed buffer if it's empty.
  Type: `boolean`, Default: `false`

*nvim-tree.hijack_cursor*
Keeps the cursor on the first letter of the filename when moving in the tree.
  Type: `boolean`, Default: `false`

*nvim-tree.update_cwd*
Changes the tree root directory on `DirChanged` and refreshes the tree.
  Type: `boolean`, Default: `false`

*nvim-tree.reload_on_bufenter*
Automatically reloads the tree on `BufEnter` nvim-tree.
  Type: `boolean`, Default: `false`

*nvim-tree.respect_buf_cwd*
Will change cwd of nvim-tree to that of new buffer's when opening nvim-tree.
  Type: `boolean`, Default: `false`

*nvim-tree.hijack_directories*
hijacks new directory buffers when they are opened (`:e dir`).

    *nvim-tree.hijack_directories.enable*
    Enable the feature.
    Disable this option if you use vim-dirvish or dirbuf.nvim.
    If `hijack_netrw` and `disable_netrw` are `false`, this feature will be disabled.
      Type: `boolean`, Default: `true`

    *nvim-tree.hijack_directories.auto_open*
    Opens the tree if the tree was previously closed.
      Type: `boolean`, Default: `true`

*nvim-tree.update_focused_file*
Update the focused file on `BufEnter`, un-collapses the folders recursively
until it finds the file.

    *nvim-tree.update_focused_file.enable*
    Enable this feature.
      Type: `boolean`, Default: `false`

    *nvim-tree.update_focused_file.update_cwd*
    Update the root directory of the tree to the one of the folder containing
    the file if the file is not under the current root directory.
    Only relevant when `update_focused_file.enable` is `true`
      Type: `boolean`, Default: `false`

    *nvim-tree.update_focused_file.ignore_list*
    List of buffer names and filetypes that will not update the root dir
    of the tree if the file isn't found under the current root directory.
    Only relevant when `update_focused_file.update_cwd` and
    `update_focused_file.enable` are `true`.
      Type: {string}, Default: {}

*nvim-tree.system_open*
Configuration options for the system open command.

    *nvim-tree.system_open.cmd*
    The command to run, leaving empty should work but useful if you want to
    override the default command with another one.
      Type: `string`, Default: `""`

    *nvim-tree.system_open.args*
    The command arguments as a list.
      Type: {string}, Default: {}

*nvim-tree.diagnostics*
Show lsp diagnostics in the signcolumn

    *nvim-tree.diagnostics.enable*
    Enable/disable the feature.
      Type: `boolean`, Default: `false`

    *nvim-tree.diagnostics.show_on_dirs*
    If the node with diagnostic is not visible, then show diagnostic in the
    parent directory.
      Type: `boolean`, Default: `false`

    *nvim-tree.diagnostics.icons*
    Icons for diagnostic severity.
      Type: {}, Default: { hint = "", info = "", warning = "", error = "" }

    `NOTE`: it will use the default diagnostic color groups to highlight the signs.
    If you wish to customize, you can override these groups:
    - `NvimTreeLspDiagnosticsError`
    - `NvimTreeLspDiagnosticsWarning`
    - `NvimTreeLspDiagnosticsInformation`
    - `NvimTreeLspDiagnosticsHint`

*nvim-tree.git*
Git integration with icons and colors.

    *nvim-tree.git.enable*
    Enable / disable the feature.
      Type: `boolean`, Default: `true`

    *nvim-tree.git.ignore*
    Ignore files based on `.gitignore`. Requires |git.enable| `= true`
    Toggle via the `toggle_git_ignored` action, default mapping `I`.
      Type: `boolean`, Default: `true`

    *nvim-tree.git.timeout*
    Kills the git process after some time if it takes too long.
      Type: `number`, Default: `400` (ms)

  You will still need to set |renderer.icons.show.git| `= true` or
  |renderer.highlight_git| `= true` to be able to see things in the
  tree. This will be changed in the future versions.

  The configurable timeout will kill the current process and so disable the
  git integration for the project that takes too long.
  The git integration is blocking, so if your timeout is too long (like not in
  milliseconds but a few seconds), it will not render anything until the git
  process returned the data.

*nvim-tree.view*
Window / buffer setup.

    *nvim-tree.view.hide_root_folder*
    Hide the path of the current working directory on top of the tree.
      Type: `boolean`, Default: `false`

    *nvim-tree.view.width*
    Width of the window, can be either a `%` string or a number representing columns.
    Only works with `side` is `left` or `right`.
      Type: `string | number`, Default: `30`

    *nvim-tree.view.height*
    Height of the window, can be either a `%` string or a number representing rows.
    Only works with  `side` is `top` or `bottom`
      Type: `string | number`, Default: `30`

    *nvim-tree.view.side*
    Side of the tree, can be one of 'left' | 'right' | 'bottom' | 'top'.
    Note that bottom/top are not working correctly yet.
      Type: `string`, Default: 'left'

    *nvim-tree.view.preserve_window_proportions*
    Preserves window proportions when opening a file.
    If `false`, the height and width of windows other than nvim-tree will be equalized.
      Type: `boolean`, Default: `false`

    *nvim-tree.view.number*
    Print the line number in front of each line.
      Type: `boolean`, Default: `false`

    *nvim-tree.view.relativenumber*
    Show the line number relative to the line with the cursor in front of each line.
    If the option `view.number` is also `true`, the number on the cursor line
    will be the line number instead of `0`.
      Type: `boolean`, Default: `false`

    *nvim-tree.view.signcolumn*
    Show diagnostic sign column. Value can be `"yes"`, `"auto"`, `"no"`.
      Type: `string`, Default: `"yes"`

    *nvim-tree.view.mappings*
    Configuration options for keymaps

	*nvim-tree.view.mappings.custom_only*
      	Will use only the provided user mappings and not the default otherwise,
      	extends the default mappings with the provided user mappings.
      	  Type: `boolean`, Default: `false`

	*nvim-tree.view.mappings.list*
	A list of keymaps that will extend or override the default keymaps.
	  Type: list of { key: table of strings or string, mode: string (vim-mode), cb: callback function as a string }
	  Default: {}

*nvim-tree.renderer*
UI rendering setup

    *nvim-tree.renderer.add_trailing*
    Appends a trailing slash to folder names.
      Type: `boolean`, Default: `false`

    *nvim-tree.renderer.group_empty*
    Compact folders that only contain a single folder into one node in the file tree.
      Type: `boolean`, Default: `false`

    *nvim-tree.renderer.highlight_git*
    Enable file highlight for git attributes using `NvimTreeGit*` highlight groups.
    This can be used with or without the icons.
      Type: `boolean`, Default: `false`

    *nvim-tree.renderer.highlight_opened_files*
    Highlight icons and/or names for opened files.
    Value can be `"none"`, `"icon"`, `"name"` or `"all"`.
      Type: `string`, Default: `"none"`

    *nvim-tree.renderer.root_folder_modifier*
    In what format to show root folder. See `:help filename-modifiers` for
    available options.
      Type: `string`, Default: `":~"`

    *nvim-tree.renderer.indent_markers*
    Configuration options for tree indent markers.

	*nvim-tree.renderer.indent_markers.enable*
	Display indent markers when folders are open
          Type: `boolean`, Default: `false`

	*nvim-tree.renderer.indent_markers.icons*
	Icons shown before the file/directory.
          Type: `table`, Default: `{ corner = "└ ", edge = "│ ", none = "  ", }`

    *nvim-tree.renderer.icons*
    Configuration options for icons.

	*nvim-tree.renderer.icons.webdev_colors*
	Use the webdev icon colors, otherwise `NvimTreeFileIcon`.
          Type: `boolean`, Default: `true`

	*nvim-tree.renderer.icons.git_placement*
	Place where the git icons will be rendered.
	After or before the `filename` (after the file/folders icons).
	When placed in the signcolumn, the value of signcolumn should be `yes`
	for the nvim-tree window.
	Note that the diagnostic signs will take precedence over the git signs.
	  Type: `after`, `before` or `signcolumn`, Default: `before`

	*nvim-tree.renderer.icons.padding*
	Inserted between icon and filename.
	Use with caution, it could break rendering if you set an empty string depending on your font.
          Type: `string`, Default: `" "`

	*nvim-tree.renderer.icons.symlink_arrow*
	Used as a separator between symlinks' source and target.
          Type: `string`, Default: `" ➛ "`

        *nvim-tree.renderer.icons.show*
        Configuration options for showing icon types.

            *nvim-tree.renderer.icons.show.file*
            Show an icon before the file name. `nvim-web-devicons` will be used if available.
              Type: `boolean`, Default: `true`

            *nvim-tree.renderer.icons.show.folder*
            Show an icon before the folder name.
              Type: `boolean`, Default: `true`

            *nvim-tree.renderer.icons.show.folder_arrow*
            Show a small arrow before the folder icon.
            Requires |renderer.icons.show.folder| `= true` and |renderer.indent_markers.enable| `= false` 
              Type: `boolean`, Default: `true`

            *nvim-tree.renderer.icons.show.git*
            Show a git status icon, see |renderer.icons.git_placement|
            Requires |git.enable| `= true`
              Type: `boolean`, Default: `true`

        *nvim-tree.renderer.icons.glyphs*
        Configuration options for icon glyphs.

            *nvim-tree.renderer.icons.glyphs.default*
            Glyph for files. Will be overridden by `nvim-web-devicons` if available.
              Type: `string`, Default: `""`

            *nvim-tree.renderer.icons.glyphs.symlink*
            Glyph for symlinks to files.
              Type: `string`, Default: `""`

            *nvim-tree.renderer.icons.glyphs.folder*
            Glyphs for directories.
              Type: `table`, Default:
                `{`
                  `arrow_closed = "",`
                  `arrow_open = "",`
                  `default = "",`
                  `open = "",`
                  `empty = "",`
                  `empty_open = "",`
                  `symlink = "",`
                  `symlink_open = "",`
                `}`

            *nvim-tree.renderer.icons.glyphs.git*
            Glyphs for git status.
              Type: `table`, Default:
                `{`
                  `unstaged = "✗",`
                  `staged = "✓",`
                  `unmerged = "",`
                  `renamed = "➜",`
                  `untracked = "★",`
                  `deleted = "",`
                  `ignored = "◌",`
                `}`

    *nvim-tree.renderer.special_files*
    A list of filenames that gets highlighted with `NvimTreeSpecialFile`.
      Type: `table`, Default: `{ "Cargo.toml", "Makefile", "README.md", "readme.md", }`

*nvim-tree.filters*
Filtering options.

    *nvim-tree.filters.dotfiles*
    Do not show dotfiles: files starting with a `.`
    Toggle via the `toggle_dotfiles` action, default mapping `H`.
      Type: `boolean`, Default: `false`

    *nvim-tree.filters.custom*
    Custom list of vim regex for file/directory names that will not be shown.
    Backslashes must be escaped e.g. "^\\.git". See |string-match|.
    Toggle via the `toggle_custom` action, default mapping `U`.
      Type: {string}, Default: {}

    *nvim-tree.filters.exclude*
    List of directories or files to exclude from filtering: always show them.
    Overrides `git.ignore`, `filters.dotfiles` and `filters.custom`.
      Type: {string}, Default: {}

*nvim-tree.trash*
Configuration options for trashing.

    *nvim-tree.trash.cmd*
    The command used to trash items (must be installed on your system).
      Type: `string`, Default: `"trash"`

    *nvim-tree.trash.require_confirm*
    Show a prompt before trashing takes place.
      Type: `boolean`, Default: `true`

*nvim-tree.actions*
Configuration for various actions.

    *nvim-tree.actions.change_dir.enable*
    Change the working directory when changing directories in the tree.
      Type: `boolean`, Default: `true`

    *nvim-tree.actions.change_dir.global*
    Use `:cd` instead of `:lcd` when changing directories.
    Consider that this might cause issues with the `update_cwd` options.
      Type: `boolean`, Default: `false`

    *nvim-tree.actions.change_dir.restrict_above_cwd*
    Restrict changing to a directory above the global current working directory.
      Type: `boolean`, Default: `false`

    *nvim-tree.actions.open_file.quit_on_open*
    Closes the explorer when opening a file.
    It will also disable preventing a buffer overriding the tree.
      Type: `boolean`, Default: `false`

    *nvim-tree.actions.open_file.resize_window*
    Resizes the tree when opening a file.
      Type: `boolean`, Default: `true`

    *nvim-tree.actions.open_file.window_picker*
    Window picker configuration.

	*nvim-tree.actions.open_file.window_picker.enable*
	Enable the feature. If the feature is not enabled, files will open in window
	from which you last opened the tree.
	  Type: `boolean`, Default: `true`

	*nvim-tree.actions.open_file.window_picker.chars*
	A string of chars used as identifiers by the window picker.
	  Type: `string`, Default: `"ABCDEFGHIJKLMNOPQRSTUVWXYZ1234567890"`

	*nvim-tree.actions.open_file.window_picker.exclude*
	Table of buffer option names mapped to a list of option values that indicates
	to the picker that the buffer's window should not be selectable.
	  Type: `table`
	  Default: {
		     `filetype = { "notify", "packer", "qf", "diff", "fugitive", "fugitiveblame", },`
		     `buftype  = { "nofile", "terminal", "help", }`
		   }

    *nvim-tree.actions.use_system_clipboard*
    A boolean value that toggle the use of system clipboard when copy/paste
    function are invoked. When enabled, copied text will be stored in registers
    '+' (system), otherwise, it will be stored in '1' and '"'.
      Type: `boolean`, Default: `true`

*nvim-tree.live_filter*
Configurations for the live_filtering feature.
The live filter allows you to filter the tree nodes dynamically, based on
regex matching (see |vim.regex|).
This feature is bound to the `f` key by default.
The filter can be cleared with the `F` key by default.

    *nvim-tree.live_filter.prefix*
    Prefix of the filter displayed in the buffer.
      Type: `string`, Default: `"[FILTER]: "`

    *nvim-tree.live_filter.always_show_folders*
    Wether to filter folders or not.
      Type: `boolean`, Default: `true`

*nvim-tree.log*
Configuration for diagnostic logging.

    *nvim-tree.log.enable*
    Enable logging to a file `$XDG_CACHE_HOME/nvim/nvim-tree.log`
      Type: `boolean`, Default: `false`

    *nvim-tree.log.truncate*
    Remove existing log file at startup.
      Type: `boolean`, Default: `false`

    *nvim-tree.log.types*
    Specify which information to log.

	*nvim-tree.log.types.all*
	Everything.
          Type: `boolean`, Default: `false`

	*nvim-tree.log.types.profile*
	Timing of some operations.
          Type: `boolean`, Default: `false`

	*nvim-tree.log.types.config*
	Options and mappings, at startup.
          Type: `boolean`, Default: `false`

	*nvim-tree.log.types.copy_paste*
	File copy and paste actions.
          Type: `boolean`, Default: `false`

	*nvim-tree.log.types.git*
	Git processing.
          Type: `boolean`, Default: `false`

==============================================================================
INFORMATIONS				        *nvim-tree-info*

|Mappings|				         *nvim-tree-mappings*

- type `g?` to see the help UI with keybindings
- move around like in any vim buffer
- `<CR>` on the root folder will cd in the above directory
- typing <C-]> will cd in the directory under the cursor
- typing <BS> will close current opened directory or parent
- typing `P` will move cursor to the parent directory

- type `a` to add a file
- type `r` to rename a file
- type `<C-r>` to rename a file and omit the filename on input
- type `x` to add/remove file/directory to cut clipboard
- type `c` to add/remove file/directory to copy clipboard
- type `p` to paste from clipboard. Cut clipboard has precedence over copy
  (will prompt for confirmation)
- type `d` to delete a file (will prompt for confirmation)
- type `]c` to go to next git item
- type `[c` to go to prev git item
- type `-` to navigate up one directory
- type `s` to open a file with default system application or a folder with default file manager
- type `<` to navigate to the previous sibling of current file/directory
- type `>` to navigate to the next sibling of current file/directory
- type `J` to navigate to the first sibling of current file/directory
- type `K` to navigate to the last sibling of current file/directory
- type `<C-e>` to edit the file in place, effectively replacing the tree explorer.
- if the file is a directory, <CR> will open the directory
- otherwise it will open the file in the buffer near the tree
- if the file is a symlink, <CR> will follow the symlink
- <C-v> will open the file in a vertical split
- <C-x> will open the file in a horizontal split
- <C-t> will open the file in a new tab
- <Tab> will open the file as a preview (keeps the cursor in the tree)
- `I` will toggle visibility of files/folders hidden via |git.ignore| option
- `H` will toggle visibility of dotfiles (files/folders starting with a `.`)
- U will toggle visibility of files/folders hidden via |filters.custom| option
- `R` will refresh the tree
- Double left click acts like <CR>
- Double right click acts like <C-]>
- `W` will collapse the whole tree
- `S` will prompt the user to enter a path and then expands the tree to match the path
- `.` will enter vim command mode with the file the cursor is on
- `C-k` will toggle a popup with file infos about the file under the cursor

Defaults to:
>
  lua <<EOF
    local list = {
      { key = {"<CR>", "o", "<2-LeftMouse>"}, action = "edit" },
      { key = "<C-e>",                        action = "edit_in_place" },
      { key = {"O"},                          action = "edit_no_picker" },
      { key = {"<2-RightMouse>", "<C-]>"},    action = "cd" },
      { key = "<C-v>",                        action = "vsplit" },
      { key = "<C-x>",                        action = "split" },
      { key = "<C-t>",                        action = "tabnew" },
      { key = "<",                            action = "prev_sibling" },
      { key = ">",                            action = "next_sibling" },
      { key = "P",                            action = "parent_node" },
      { key = "<BS>",                         action = "close_node" },
      { key = "<Tab>",                        action = "preview" },
      { key = "K",                            action = "first_sibling" },
      { key = "J",                            action = "last_sibling" },
      { key = "I",                            action = "toggle_git_ignored" },
      { key = "H",                            action = "toggle_dotfiles" },
      { key = "R",                            action = "refresh" },
      { key = "a",                            action = "create" },
      { key = "d",                            action = "remove" },
      { key = "D",                            action = "trash" },
      { key = "r",                            action = "rename" },
      { key = "<C-r>",                        action = "full_rename" },
      { key = "x",                            action = "cut" },
      { key = "c",                            action = "copy" },
      { key = "p",                            action = "paste" },
      { key = "y",                            action = "copy_name" },
      { key = "Y",                            action = "copy_path" },
      { key = "gy",                           action = "copy_absolute_path" },
      { key = "[c",                           action = "prev_git_item" },
      { key = "]c",                           action = "next_git_item" },
      { key = "-",                            action = "dir_up" },
      { key = "s",                            action = "system_open" },
      { key = "f",                            action = "live_filter" },
      { key = "F",                            action = "clear_live_filter" },
      { key = "q",                            action = "close" },
      { key = "g?",                           action = "toggle_help" },
      { key = 'W',                            action = "collapse_all" },
      { key = "S",                            action = "search_node" },
      { key = ".",                            action = "run_file_command" },
      { key = "<C-k>",                        action = "toggle_file_info" }
      { key = "U",                            action = "toggle_custom" },
    }
<

The `list` option in `view.mappings.list` is a table of

- key can be either a string or a table of string (lhs)
- action is the name of the action, set to `""` to remove default action
- action_cb is the function that will be called, it receives the node as a parameter. Optional for default actions
- mode is normal by default
>
  lua <<EOF
    local tree_cb = require'nvim-tree.config'.nvim_tree_callback

    local function print_node_path(node) {
      print(node.absolute_path)
    }

    local list = {
      { key = {"<CR>", "o" }, action = "edit", mode = "n"},
      { key = "p", action = "print_path", action_cb = print_node_path },
      { key = "s", cb = tree_cb("vsplit") }, --tree_cb and the cb property are deprecated
      { key = "<2-RightMouse>", action = "" }, -- will remove default cd action
    }


|Features|					*nvim-tree-features*

File icons with vim-devicons.

Uses other type of icons so a good font support is recommended.
If the tree renders weird glyphs, install the correct fonts.

Syntax highlighting uses g:terminal_color_ from colorschemes, fallbacks to
ugly colors otherwise.

Git integration tells when a file is:
- ✗  unstaged or folder is dirty
- ✓  staged
- ★  new file
- ✓ ✗ partially staged
- ✓ ★ new file staged
- ✓ ★ ✗ new file staged and has unstaged modifications
- ═  merging
- ➜  renamed

Mouse support defined in |KeyBindings|

==============================================================================
HIGHLIGHT GROUPS				        *nvim-tree-highlight*

|nvim_tree_highlight|				        *nvim_tree_highlight*

All the following highlight groups can be configured by hand. Aside from
`NvimTreeWindowPicker`, it is not advised to colorize the background of these
groups.

Example (in your `init.vim`):
>
    highlight NvimTreeSymlink guifg=blue gui=bold,underline
<
You should have 'termguicolors' enabled, otherwise, colors will not be
applied.

NvimTreeSymlink
NvimTreeFolderName
NvimTreeRootFolder
NvimTreeFolderIcon
NvimTreeFileIcon
NvimTreeEmptyFolderName
NvimTreeOpenedFolderName
NvimTreeExecFile
NvimTreeOpenedFile
NvimTreeSpecialFile
NvimTreeImageFile
NvimTreeIndentMarker

LspDiagnosticsError
LspDiagnosticsWarning
LspDiagnosticsInformation
LspDiagnosticsHint

NvimTreeGitDirty
NvimTreeGitStaged
NvimTreeGitMerge
NvimTreeGitRenamed
NvimTreeGitNew
NvimTreeGitDeleted

NvimTreeWindowPicker

There are also links to normal bindings to style the tree itself.

NvimTreeNormal
NvimTreeEndOfBuffer
NvimTreeCursorLine
NvimTreeVertSplit (deprecated, use NvimTreeWinSeparator)
NvimTreeWinSeparator
NvimTreeCursorColumn

There are also links for file highlight with git properties
These all link to there Git equivalent

NvimTreeFileDirty
NvimTreeFileStaged
NvimTreeFileMerge
NvimTreeFileRenamed
NvimTreeFileNew
NvimTreeFileDeleted

There are 2 highlight groups for the live filter feature

NvimTreeLiveFilterPrefix
NvimTreeLiveFilterValue

==============================================================================
vinegar style                                         *nvim-tree-vinegar*

|nvim_tree_vinegar|                                     *nvim_tree_vinegar*

nvim-tree can behave like vinegar. To allow this, you will need to configure
it in a specific way:

- Use `require"nvim-tree".open_replacing_current_buffer()` instead of the
default open command.
You can easily implement a toggle using this too:
>
    local function toggle_replace()
      local view = require"nvim-tree.view"
      if view.is_visible() then
	view.close()
      else
	require"nvim-tree".open_replacing_current_buffer()
      end
    end
<
- Use the `edit_in_place` action to edit files. It's bound to `<C-e>` by
default, vinegar uses `<CR>`. You can override this with:
>
    require"nvim-tree".setup {
      view = {
        mappings = {
	  list = {
	    { key = "<CR>", action = "edit_in_place" }
	  }
        }
      }
    }
<
Going up a dir is bound to `-` by default in nvim-tree which is identical to
vinegar, no change is needed here.

You'll also need to set |nvim-tree.hijack_netrw| to `true` during setup.
A good functionnality to enable is |nvim-tree.hijack_directories|.

==============================================================================
events                                                 *nvim-tree-events*

|nvim_tree_events|                                     *nvim_tree_events*

nvim-tree will dispatch events whenever an action is made. These events can be
subscribed to through handler functions. This allows for even further
customization of nvim-tree.

A handler for an event is just a function which receives one argument -
the payload of the event. The payload is different for each event type. Refer
to |nvim_tree_registering_handlers| for more information.
<

|nvim_tree_registering_handlers|                *nvim_tree_registering_handlers*

Handlers are registered by calling the `on_*` functions available in the
`require('nvim-tree.events')` module. See |nvim-tree.events|.


For example, registering a handler for when a node is renamed is done like this: >

    local events = require('nvim-tree.events')

    events.on_node_renamed(function(data)
        print("Node renamed from " .. data.old_name .. " to " ..  data.new_name)
    end)

==============================================================================
Lua module: nvim-tree.events                           *nvim-tree.events*

                                     *nvim-tree.events.on_nvim_tree_ready()*
on_nvim_tree_ready({handler})
                Registers a handler for when NvimTree has been initialized.

                Parameters: ~
                  {handler}      `{function}` Handler function, with the
                                 signature `function()`.

                                     *nvim-tree.events.on_node_renamed()*
on_node_renamed({handler})
                Registers a handler for when a node is renamed.
                • Note: A node can either be a file or a directory.

                Parameters: ~
                  {handler}      `{function}` Handler function, with the
                                 signature `function(payload)`.
                payload: ~
                  {old_name}     `{string}` Absolute path to the old node location.
                  {new_name}     `{string}` Absolute path to the new node location.

                                     *nvim-tree.events.on_file_created()*
on_file_created({handler})
                Registers a handler for when a file is created.

                Parameters: ~
                  {handler}      `{function}` Handler function, with the
                                 signature `function(payload)`.
                payload: ~
                  {fname}        `{string}` Absolute path to the created file

                                     *nvim-tree.events.on_file_removed()*
on_file_removed({handler})
                Registers a handler for when a file is removed.

                Parameters: ~
                  {handler}      `{function}` Handler function, with the
                                 signature `function(payload)`.
                payload: ~
                  {fname}        `{string}` Absolute path to the removed file.

                                   *nvim-tree.events.on_folder_created()*
on_folder_created({handler})
                Registers a handler for when a folder is created.

                Parameters: ~
                  {handler}      `{function}` Handler function, with the
                                 signature `function(payload)`.
                payload: ~
                  {folder_name}  `{string}` Absolute path to the created folder.

                                   *nvim-tree.events.on_folder_removed()*
on_folder_removed({handler})
                Registers a handler for when a folder is removed.

                Parameters: ~
                  {handler}      `{function}` Handler function, with the
                                 signature `function(payload)`.
                payload: ~
                  {folder_name}  `{string}` Absolute path to the removed folder.

                                   *nvim-tree.events.on_tree_open()*
on_tree_open({handler})
                Registers a handler for when NvimTree is opened.

                Parameters: ~
                  {handler}      `{function}` Handler function, with the
                                 signature `function()`.

                                   *nvim-tree.events.on_tree_close()*
on_tree_close({handler})
                Registers a handler for when NvimTree is closed.

                Parameters: ~
                  {handler}      `{function}` Handler function, with the
                                 signature `function()`.

 vim:tw=78:ts=8:noet:ft=help:norl:
