*nvim-tree.lua* A file explorer written in lua

Minimum version of neovim: 0.6.0

Author: Yazdani Kiyan <yazdani.kiyan@protonmail.com>

==============================================================================
INTRODUCTION                                       *nvim-tree-introduction*

This file explorer requires `neovim >= 0.6.0`

==============================================================================
QUICK START                                        *nvim-tree-quickstart*

open the tree with :NvimTreeToggle
>
  nnoremap <C-n> :NvimTreeToggle<CR>
  lua require 'nvim-tree'.toggle()
<

==============================================================================
COMMANDS                                           *nvim-tree-commands*

|:NvimTreeOpen| 	                                  *:NvimTreeOpen*

opens the tree. Takes an optional path argument.

|:NvimTreeClose| 	                          *:NvimTreeClose*

closes the tree

|:NvimTreeToggle| 	                          *:NvimTreeToggle*

open or close the tree

|:NvimTreeFocus| 	                          *:NvimTreeFocus*

open the tree if it is closed, and then focus on the tree

|:NvimTreeRefresh|			          *:NvimTreeRefresh*

refresh the tree

|:NvimTreeFindFile|				  *:NvimTreeFindFile*

The command will change the cursor in the tree for the current bufname.

It will also open the leafs of the tree leading to the file in the buffer
(if you opened a file with something else than the NvimTree, like `fzf` or
`:split`)

|:NvimTreeFindFileToggle|			  *:NvimTreeFindFileToggle*

close the tree or change the cursor in the tree for the current bufname,
similar to combination of |:NvimTreeToggle| and |:NvimTreeFindFile|

|:NvimTreeClipboard|			          *:NvimTreeClipboard*

Print clipboard content for both cut and copy

|:NvimTreeResize|			          *:NvimTreeResize*

Resize the NvimTree window to the given size. Example: `:NvimTreeResize 50`
resizes the window to the width of 50. If the size starts with "+" or "-" it
adds or removes the given value to the current window width.
Example `:NvimTreeResize -20` removes the value 20 from the current width. And
`:NvimTreeResize +20` adds the value 20 to the current width.

|:NvimTreeCollapse|			          *:NvimTreeCollapse*

Collapses the nvim-tree recursively.

|:NvimTreeCollapseKeepBuffers|		          *:NvimTreeCollapseKeepBuffers*

Collapses the nvim-tree recursively, but keep the directories open, which are 
used in an open buffer.


==============================================================================
SETUP                                *nvim-tree.setup*

To configure the tree (and make it runnable), you should call the setup
function.

>
    require("nvim-tree").setup { -- BEGIN_DEFAULT_OPTS
      auto_close = false,
      auto_reload_on_write = true,
      disable_netrw = false,
      hide_root_folder = false,
      hijack_cursor = false,
      hijack_netrw = true,
      hijack_unnamed_buffer_when_opening = false,
      ignore_buffer_on_setup = false,
      open_on_setup = false,
      open_on_tab = false,
      sort_by = "name",
      update_cwd = false,
      view = {
        width = 30,
        height = 30,
        side = "left",
        preserve_window_proportions = false,
        number = false,
        relativenumber = false,
        signcolumn = "yes",
        mappings = {
          custom_only = false,
          list = {
            -- user mappings go here
          },
        },
      },
      hijack_directories = {
        enable = true,
        auto_open = true,
      },
      update_focused_file = {
        enable = false,
        update_cwd = false,
        ignore_list = {},
      },
      ignore_ft_on_setup = {},
      system_open = {
        cmd = nil,
        args = {},
      },
      diagnostics = {
        enable = false,
        show_on_dirs = false,
        icons = {
          hint = "",
          info = "",
          warning = "",
          error = "",
        },
      },
      filters = {
        dotfiles = false,
        custom = {},
        exclude = {},
      },
      git = {
        enable = true,
        ignore = true,
        timeout = 400,
      },
      actions = {
        change_dir = {
          enable = true,
          global = false,
        },
        open_file = {
          quit_on_open = false,
          resize_window = false,
          window_picker = {
            enable = true,
            chars = "ABCDEFGHIJKLMNOPQRSTUVWXYZ1234567890",
            exclude = {
              filetype = { "notify", "packer", "qf", "diff", "fugitive", "fugitiveblame" },
              buftype = { "nofile", "terminal", "help" },
            },
          },
        },
      },
      trash = {
        cmd = "trash",
        require_confirm = true,
      },
      log = {
        enable = false,
        truncate = false,
        types = {
          all = false,
          config = false,
          git = false,
        },
      },
    } -- END_DEFAULT_OPTS
<

As options are currently being migrated, configuration of global options in
|nvim-tree-options| should be done BEFORE the setup call.

Here is a list of the options available in the setup call:

*nvim-tree.disable_netrw*
- |disable_netrw|: completely disable netrw
  type: `boolean`
  default: `false`

*nvim-tree.hijack_netrw*
- |hijack_netrw|: hijack netrw windows (overriden if |disable_netrw| is `true`)
  type: `boolean`
  default: `true`

*nvim-tree.open_on_setup*
- |open_on_setup|: will automatically open the tree when running setup if current
  buffer is a directory, is empty or is unnamed.
  type: `boolean`
  default: `false`

*nvim-tree.ignore_buffer_on_setup*
- |ignore_buffer_on_setup|: will ignore the buffer, when deciding to open the tree
  on setup
  type: `boolean`
  default: `false`

*nvim-tree.ignore_ft_on_setup*
- |ignore_ft_on_setup|: list of filetypes that will make |open_on_setup| not
  open. You can use this option if you don't want the tree to open in some
  scenarios (eg using vim startify).
  type: `{string}`
  default: `{}`

*nvim-tree.auto_close*
- |auto_close|: force closing neovim when the tree is the last window in the view.
  type: `boolean`
  default: `false`

*nvim-tree.auto_reload_on_write*
- |auto_reload_on_write|: reloads the explorer every time a buffer is written to
  type: `boolean`
  default: `true`

*nvim-tree.open_on_tab*
- |open_on_tab|: opens the tree automatically when switching tabpage or opening a new
  tabpage if the tree was previously open.
  type: `boolean`
  default: `false`

*nvim-tree.sort_by*
- |sort_by|: changes how files within the same directory are sorted. can be
  one of 'name' | 'modification_time'
  type: `string`
  default: `"name"`

*nvim-tree.hijack_unnamed_buffer_when_opening*
- |hijack_unnamed_buffer_when_opening|: opens in place of the unnamed
  buffer if it's empty.
  type: `boolean`
  default: `false`

*nvim-tree.hijack_directories*
- |hijack_directories|: hijacks new directory buffers when they are opened (`:e dir`).

  - |hijack_directories.enable|: enable the feature. Disable this option if you
    use vim-dirvish or dirbuf.nvim. If |hijack_netrw| and |disable_netrw| are
    `false`, this feature will be disabled.
    type: `boolean`
    default: `true`

  - |hijack_directories.auto_open|: opens the tree if the tree was previously closed.
    type: `boolean`
    default: `true`

*nvim-tree.hijack_cursor*
- |hijack_cursor|: keeps the cursor on the first letter of the filename when
  moving in the tree.
  type: `boolean`
  default: `false`

*nvim-tree.update_cwd*
- |update_cwd|: changes the tree root directory on `DirChanged` and refreshes
  the tree.
  type: `boolean`
  default: `false`

*nvim-tree.update_focused_file*
- |update_focused_file|: update the focused file on `BufEnter`, un-collapses
  the folders recursively until it finds the file

  - |update_focused_file.enable|: enable this feature.
    type: `boolean`
    default: `false`

  - |update_focused_file.update_cwd|: update the root directory of the tree to the one
    of the folder containing the file if the file is not under the current root
    directory. Only relevant when |update_focused_file.enable| is `true`
    type: `boolean`
    default: `false`

  - |update_focused_file.ignore_list|: list of buffer names and filetypes that will not
    update the root dir of the tree if the file isn't found under the current root
    directory. Only relevant when |update_focused_file.update_cwd| is `true` and
    |update_focused_file.enable| is `true`.
    type: `{string}`
    default: `{}`

*nvim-tree.system_open*
- |system_open|: configuration options for the system open command

  - |system_open.cmd|: the command to run, leaving nil should work but
    useful if you want to override the default command with another one.
    type: `string`
    default: `nil`

  - |system_open.args|: the command arguments as a list
    type: `{string}`
    default: `{}`

*nvim-tree.diagnostics*
- |diagnostics|: show lsp diagnostics in the signcolumn

  - |diagnostics.enable|: enable/disable the feature
      type: `boolean`
      default: `false`

  - |diagnostics.show_on_dirs|: if the node with diagnostic is not visible,
    then show diagnostic in the parent directory
      type: `boolean`
      default: `false`

  - |diagnostics.icons|: icons for diagnostic severity
      type: `table`
      default: `{ hint = "", info = "", warning = "", error = "" }`

    `NOTE`: it will use the default diagnostic color groups to highlight the signs.
    If you wish to customize, you can override these groups:
    - `NvimTreeLspDiagnosticsError`
    - `NvimTreeLspDiagnosticsWarning`
    - `NvimTreeLspDiagnosticsInformation`
    - `NvimTreeLspDiagnosticsHint`

*nvim-tree.git*
- |git|: git integration with icons and colors

  - |git.enable|: enable / disable the feature
    type: `boolean`
    default: `true`

  - |git.ignore|: ignore files based on `.gitignore`
    type: `boolean`
    default: `true`

  - |git.timeout|: kills the git process after some time if it takes too long
    type: `number`
    default: `400` (ms)

  You will still need to configure `g:nvim_tree_show_icons.git` or
  `g:nvim_tree_git_hl` to be able to see things in the tree. This will be
  changed in the future versions.

  The configurable timeout will kill the current process and so disable the
  git integration for the project that takes too long.
  The git integration is blocking, so if your timeout is too long (like not in
  milliseconds but a few seconds), it will not render anything until the git
  process returned the data.

*nvim-tree.view*
- |view|: window / buffer setup

  - |view.hide_root_folder|: hide the path of the current working
    directory on top of the tree
      type: `boolean`
      default: `false`

  - |view.width|: width of the window, can be either a `%` string or
    a number representing columns. Only works with |view.side| `left` or `right`
      type: `string | number`
      default: `30`

  - |view.height|: height of the window, can be either a `%` string or
    a number representing rows. Only works with |view.side| `top` or `bottom`
      type: `string | number`
      default: `30`

  - |view.side|: side of the tree, can be one of 'left' | 'right' | 'bottom' | 'top'
    Note that bottom/top are not working correctly yet.
      type: `string`
      default: 'left'

  - |view.preserve_window_proportions|: preserve window proportions when
    opening a file. If `false`, the height and width of windows other than
    nvim-tree will be equalized.
      type: `boolean`
      default: `false`

  - |view.number|: print the line number in front of each line.
      type: `boolean`
      default: `false`

  - |view.relativenumber|: show the line number relative to the line with the
    cursor in front of each line. If the option `view.number` is also `true`,
    the number on the cursor line will be the line number instead of `0`.
      type: `boolean`
      default: `false`

  - |view.signcolumn|: show diagnostic sign column. Value can be `"yes"`,
    `"auto"`, `"no"`
      type: `string`
      default: `"yes"`

  - |view.mappings|: configuration options for keymaps

    - |view.mappings.custom_only|: will use only the provided user mappings and not the default
      otherwise, extends the default mappings with the provided user mappings
        type: `boolean`
        default: `false`

    - |view.mappings.list|: a list of keymaps that will extend or override the default keymaps
        type: list of `{ key: table of strings or string, mode: string (vim-mode), cb: callback function as a string }`
        default: `{}`

*nvim-tree.filters*
|filters|: filtering options

  - |filters.dotfiles|: do not show `dotfiles` (files starting with a `.`)
      type: `boolean`
      default: `false`

  - |filters.custom|: custom list of string that will not be shown.
      type: `{string}`
      default: `{}`

  - |filters.exclude|: list of directories or files to exclude from filtering
    (will always be shown)
      type: `{string}`
      default: `{}`

*nvim-tree.trash*
|trash|: configuration options for trashing

  - |trash.cmd|: the command used to trash items (must be installed on your system)
      type: `string`
      default: `"trash"`

  - |trash.require_confirm|: show a prompt before trashing takes place.
      type: `boolean`
      default: `true`

*nvim-tree.actions*
|actions|: configuration for various actions

  - |actions.change_dir.enable|: change the working directory when changing
    directories in the tree.
      type: `boolean`
      default: `true`

  - |actions.change_dir.global|: use `:cd` instead of `:lcd` when changing
    directories. Consider that this might cause issues with
    the |update_cwd| options.
      type: `boolean`
      default: `false`

  - |actions.open_file.quit_on_open|: closes the explorer when opening a file.
    It will also disable preventing a buffer overriding the tree.
      type: `boolean`
      default: `false`

  - |actions.open_file.resize_window|: resizes the tree when opening a file
      type: `boolean`
      default: `false`

  - |actions.open_file.window_picker|: window picker configuration

    - |actions.open_file.window_picker.enable|: Enable the feature. If the
      feature is not enabled, files will open in window from which you
      last opened the tree.
	type: `boolean`
	default: `true`

    - |actions.open_file.window_picker.chars|: A string of chars used as 
      identifiers by the window picker.
	type: `string`
	default: `"ABCDEFGHIJKLMNOPQRSTUVWXYZ1234567890"`

    - |actions.open_file.window_picker.exclude|: Table of buffer option names
      mapped to a list of option values that indicates to the picker that the
      buffer's window should not be selectable.
	type: `table`
	default: `{`
			`filetype = { "notify", "packer", "qf", "diff", "fugitive", "fugitiveblame", },`
			`buftype  = { "nofile", "terminal", "help", }`
		`}`

*nvim-tree.log*
|log|: configuration for diagnostic logging

  - |log.enable|: enable logging to a file `nvim-tree-HH:MM:SS-username.log`
    in $XDG_CACHE_HOME/nvim
      type: `boolean`
      default: `false`

  - |log.truncate|: remove existing log file at startup
      type: `boolean`
      default: `false`

  - |log.types|: specify which information to log

    - |log.types.all|: everything
        type: `boolean`
        default: `false`

    - |log.types.config|: options and mappings, at startup
        type: `boolean`
        default: `false`

    - |log.types.copy_paste|: file copy and paste actions
        type: `boolean`
        default: `false`

    - |log.types.git|: git processing
        type: `boolean`
        default: `false`

==============================================================================
OPTIONS				                  *nvim-tree-options*

|g:nvim_tree_show_icons|			        *g:nvim_tree_show_icons*

Dictionary, if your terminal or font doesn't support certain unicode
character, the tree UI might be messed up. The following configuration
can disable icons per type:
>
    let g:nvim_tree_show_icons = {
	\ 'git': 1,
	\ 'folders': 1,
	\ 'files': 1,
  \ 'folder_arrows': 1,
	\}

Can be one of `1` and `0` for each key. By default the tree will try
to render the icons. The `files` key can only work if `nvim-web-devicons`
is installed and in your |runtimepath|
(https://github.com/kyazdani42/nvim-web-devicons)
if folder is 1, you can also set `folder_arrows = 1` to show small arrows
next to the folder icons but this will not work when you set
|g:nvim_tree_indent_markers| (because of UI conflict).

|g:nvim_tree_highlight_opened_files|			        *g:nvim_tree_highlight_opened_files*

Highlight icons and/or names for opened files and directories
Default is 0

Must be:
    0: No highlight
    1: Enable highligting for folders and file icons only.
    2: Enable highligting for folders and file names only.
    3: Enable highligting for folders and both file icons and names.

|g:nvim_tree_icons|                                *g:nvim_tree_icons*

You can set icons for:

- The git status.
- The default icon that shows when no icon is found for a file
  or if you are not using icons.
- Symlinks. If an icon is not provided, the `default` icon is used.
>
  let g:nvim_tree_icons = {
      \ 'default':        '',
      \ 'symlink':        '',
      \ 'git': {
      \   'unstaged':     "✗",
      \   'staged':       "✓",
      \   'unmerged':     "",
      \   'renamed':      "➜",
      \   'untracked':    "★",
      \   'deleted':      "",
      \  },
      \ 'folder': {
      \   'arrow_open':   "",
      \   'arrow_closed': "",
      \   'default':      "",
      \   'open':         "",
      \   'empty':        "",
      \   'empty_open':   "",
      \   'symlink':      "",
      \   'symlink_open': "",
      \  },
      \  'lsp': {
      \    'hint': "",
      \    'info': "",
      \    'warning': "",
      \    'error': "",
      \  }
      \ }

|g:nvim_tree_git_hl|                                *g:nvim_tree_git_hl*

You can enable file highlight for git attributes by setting this property.
This can be used with or without the icons.

|g:nvim_tree_indent_markers|                   *g:nvim_tree_indent_markers*

Can be `0` or `1`. When `1`, will display indent markers when folders are open
Default is 0

|g:nvim_tree_root_folder_modifier|		     *g:nvim_tree_root_folder_modifier*

In what format to show root folder. See `:help filename-modifiers` for
available options.
Default is `:~`

|g:nvim_tree_add_trailing|			         *g:nvim_tree_add_trailing*

Can be 0 or 1. When 1, appends a trailing slash to folder names.
0 by default.

|g:nvim_tree_group_empty|                      *g:nvim_tree_group_empty*

Can be 0 or 1. When 1, folders that contain only one folder are grouped
together. 0 by default.

|g:nvim_tree_special_files|                    *g:nvim_tree_special_files*

A list of filenames that gets highlighted with `NvimTreeSpecialFile`.
default table is

>
    {
      ["Cargo.toml"] = true,
      Makefile = true,
      ["README.md"] = true,
      ["readme.md"] = true,
   }
<

|g:nvim_tree_icon_padding|                *g:nvim_tree_icon_padding*

One space by default, used for rendering the space between the icon and the filename. Use with caution, it could break rendering if you set an empty string depending on your font.

|g:nvim_tree_symlink_arrow|                *g:nvim_tree_symlink_arrow*

Defaults to ' ➛ '. Used as a separator between symlinks' source and target.

|g:nvim_tree_respect_buf_cwd|             *g:nvim_tree_respect_buf_cwd*

Can be 0 or 1. 0 by default.
Will change cwd of nvim-tree to that of new buffer's when opening nvim-tree.

|g:nvim_tree_create_in_closed_folder|     *g:nvim_tree_create_in_closed_folder*

Can be 0 or 1. 0 by default.
Creating a file when the cursor is on a closed folder will set the
path to be inside the closed folder when 1, and on the parent folder when 0.

==============================================================================
INFORMATIONS				        *nvim-tree-info*

|Mappings|				         *nvim-tree-mappings*

- type `g?` to see the help UI with keybindings
- move around like in any vim buffer
- `<CR>` on the root folder will cd in the above directory
- typing <C-]> will cd in the directory under the cursor
- typing <BS> will close current opened directory or parent
- typing `P` will move cursor to the parent directory

- type `a` to add a file
- type `r` to rename a file
- type `<C-r>` to rename a file and omit the filename on input
- type `x` to add/remove file/directory to cut clipboard
- type `c` to add/remove file/directory to copy clipboard
- type `p` to paste from clipboard. Cut clipboard has precedence over copy
  (will prompt for confirmation)
- type `d` to delete a file (will prompt for confirmation)
- type `]c` to go to next git item
- type `[c` to go to prev git item
- type `-` to navigate up one directory
- type `s` to open a file with default system application or a folder with default file manager
- type `<` to navigate to the previous sibling of current file/directory
- type `>` to navigate to the next sibling of current file/directory
- type `J` to navigate to the first sibling of current file/directory
- type `K` to navigate to the last sibling of current file/directory
- type `<C-e>` to edit the file in place, effectively replacing the tree explorer.
- if the file is a directory, <CR> will open the directory
- otherwise it will open the file in the buffer near the tree
- if the file is a symlink, <CR> will follow the symlink
- <C-v> will open the file in a vertical split
- <C-x> will open the file in a horizontal split
- <C-t> will open the file in a new tab
- <Tab> will open the file as a preview (keeps the cursor in the tree)
- `I` will toggle visibility of files/folders hidden via |git.ignore| option
- `H` will toggle visibility of dotfiles (files/folders starting with a `.`)
- U will toggle visibility of files/folders hidden via |filters.custom| option
- `R` will refresh the tree
- Double left click acts like <CR>
- Double right click acts like <C-]>
- `W` will collapse the whole tree
- `S` will prompt the user to enter a path and then expands the tree to match the path
- `.` will enter vim command mode with the file the cursor is on
- `C-k` will toggle a popup with file infos about the file under the cursor

Defaults to:
>
  lua <<EOF
    local list = {
      { key = {"<CR>", "o", "<2-LeftMouse>"}, action = "edit" },
      { key = "<C-e>",                        action = "edit_in_place" },
      { key = {"O"},                          action = "edit_no_picker" },
      { key = {"<2-RightMouse>", "<C-]>"},    action = "cd" },
      { key = "<C-v>",                        action = "vsplit" },
      { key = "<C-x>",                        action = "split" },
      { key = "<C-t>",                        action = "tabnew" },
      { key = "<",                            action = "prev_sibling" },
      { key = ">",                            action = "next_sibling" },
      { key = "P",                            action = "parent_node" },
      { key = "<BS>",                         action = "close_node" },
      { key = "<Tab>",                        action = "preview" },
      { key = "K",                            action = "first_sibling" },
      { key = "J",                            action = "last_sibling" },
      { key = "I",                            action = "toggle_git_ignored" },
      { key = "H",                            action = "toggle_dotfiles" },
      { key = "R",                            action = "refresh" },
      { key = "a",                            action = "create" },
      { key = "d",                            action = "remove" },
      { key = "D",                            action = "trash" },
      { key = "r",                            action = "rename" },
      { key = "<C-r>",                        action = "full_rename" },
      { key = "x",                            action = "cut" },
      { key = "c",                            action = "copy" },
      { key = "p",                            action = "paste" },
      { key = "y",                            action = "copy_name" },
      { key = "Y",                            action = "copy_path" },
      { key = "gy",                           action = "copy_absolute_path" },
      { key = "[c",                           action = "prev_git_item" },
      { key = "]c",                           action = "next_git_item" },
      { key = "-",                            action = "dir_up" },
      { key = "s",                            action = "system_open" },
      { key = "q",                            action = "close" },
      { key = "g?",                           action = "toggle_help" },
      { key = 'W',                            action = "collapse_all" },
      { key = "S",                            action = "search_node" },
      { key = ".",                            action = "run_file_command" },
      { key = "<C-k>",                        action = "toggle_file_info" }
      { key = "U",                            action = "toggle_custom" },
    }
<
The `list` option in `view.mappings.list` is a table of

- key can be either a string or a table of string (lhs)
- action is the name of the action, set to `""` to remove default action
- action_cb is the function that will be called, it receives the node as a parameter. Optional for default actions
- mode is normal by default
>
  lua <<EOF
    local tree_cb = require'nvim-tree.config'.nvim_tree_callback

    local function print_node_path(node) {
      print(node.absolute_path)
    }

    local list = {
      { key = {"<CR>", "o" }, action = "edit", mode = "n"},
      { key = "p", action = "print_path", action_cb = print_node_path },
      { key = "s", cb = tree_cb("vsplit") }, --tree_cb and the cb property are deprecated
      { key = "<2-RightMouse>", action = "" }, -- will remove default cd action
    }


|Features|					*nvim-tree-features*

File icons with vim-devicons.

Uses other type of icons so a good font support is recommended.
If the tree renders weird glyphs, install the correct fonts.

Syntax highlighting uses g:terminal_color_ from colorschemes, fallbacks to
ugly colors otherwise.

Git integration tells when a file is:
- ✗  unstaged or folder is dirty
- ✓  staged
- ★  new file
- ✓ ✗ partially staged
- ✓ ★ new file staged
- ✓ ★ ✗ new file staged and has unstaged modifications
- ═  merging
- ➜  renamed

Mouse support defined in |KeyBindings|

==============================================================================
HIGHLIGHT GROUPS				        *nvim-tree-highlight*

|nvim_tree_highlight|				        *nvim_tree_highlight*

All the following highlight groups can be configured by hand. Aside from
`NvimTreeWindowPicker`, it is not advised to colorize the background of these
groups.

Example (in your `init.vim`):
>
    highlight NvimTreeSymlink guifg=blue gui=bold,underline
<
You should have 'termguicolors' enabled, otherwise, colors will not be
applied.

NvimTreeSymlink
NvimTreeFolderName
NvimTreeRootFolder
NvimTreeFolderIcon
NvimTreeEmptyFolderName
NvimTreeOpenedFolderName
NvimTreeExecFile
NvimTreeOpenedFile
NvimTreeSpecialFile
NvimTreeImageFile
NvimTreeIndentMarker

LspDiagnosticsError
LspDiagnosticsWarning
LspDiagnosticsInformation
LspDiagnosticsHint

NvimTreeGitDirty
NvimTreeGitStaged
NvimTreeGitMerge
NvimTreeGitRenamed
NvimTreeGitNew
NvimTreeGitDeleted

NvimTreeWindowPicker

There are also links to normal bindings to style the tree itself.

Normal
EndOfBuffer
CursorLine
VertSplit
CursorColumn

There are also links for file highlight with git properties
These all link to there Git equivalent

NvimTreeFileDirty
NvimTreeFileStaged
NvimTreeFileMerge
NvimTreeFileRenamed
NvimTreeFileNew
NvimTreeFileDeleted

==============================================================================
vinegar style                                         *nvim-tree-vinegar*

|nvim_tree_vinegar|                                     *nvim_tree_vinegar*

nvim-tree can behave like vinegar. To allow this, you will need to configure
it in a specific way:

- Use `require"nvim-tree".open_replacing_current_buffer()` instead of the
default open command.
You can easily implement a toggle using this too:
>
    local function toggle_replace()
      local view = require"nvim-tree.view"
      if view.is_visible() then
	view.close()
      else
	require"nvim-tree".open_replacing_current_buffer()
      end
    end
<
- Use the `edit_in_place` action to edit files. It's bound to `<C-e>` by
default, vinegar uses `<CR>`. You can override this with:
>
    require"nvim-tree".setup {
      view = {
        mappings = {
	  list = {
	    { key = "<CR>", action = "edit_in_place" }
	  }
        }
      } 
    }
<
Going up a dir is bound to `-` by default in nvim-tree which is identical to
vinegar, no change is needed here.

You'll also need to set |nvim-tree.hijack_netrw| to `true` during setup.
A good functionnality to enable is |nvim-tree.hijack_directories|.

==============================================================================
events                                                 *nvim-tree-events*

|nvim_tree_events|                                     *nvim_tree_events*

nvim-tree will dispatch events whenever an action is made. These events can be
subscribed to through handler functions. This allows for even further
customization of nvim-tree.

A handler for an event is just a function which receives one argument -
the payload of the event. The payload is different for each event type. Refer
to |nvim_tree_registering_handlers| for more information.
<

|nvim_tree_registering_handlers|                *nvim_tree_registering_handlers*

Handlers are registered by calling the `on_*` functions available in the
`require('nvim-tree.events')` module. See |nvim-tree.events|.


For example, registering a handler for when a node is renamed is done like this: >

    local events = require('nvim-tree.events')

    events.on_node_renamed(function(data)
        print("Node renamed from " .. data.old_name .. " to " ..  data.new_name)
    end)

==============================================================================
Lua module: nvim-tree.events                           *nvim-tree.events*

                                     *nvim-tree.events.on_nvim_tree_ready()*
on_nvim_tree_ready({handler})
                Registers a handler for when NvimTree has been initialized.

                Parameters: ~
                    {handler}    (function) Handler function, with the
                                 signature `function()`.

                                     *nvim-tree.events.on_node_renamed()*
on_node_renamed({handler})
                Registers a handler for when a node is renamed.
                • Note: A node can either be a file or a directory.

                Parameters: ~
                    {handler}    (function) Handler function, with the
                                 signature `function(payload)`.

                                     *nvim-tree.events.on_file_created()*
on_file_created({handler})
                Registers a handler for when a file is created.

                Parameters: ~
                    {handler}    (function) Handler function, with the
                                 signature `function(payload)`.

                                     *nvim-tree.events.on_file_removed()*
on_file_removed({handler})
                Registers a handler for when a file is removed.

                Parameters: ~
                    {handler}    (function) Handler function, with the
                                 signature `function(payload)`.

                                   *nvim-tree.events.on_folder_created()*
on_folder_created({handler})
                Registers a handler for when a folder is created.

                Parameters: ~
                    {handler}    (function) Handler function, with the
                                 signature `function(payload)`.

                                   *nvim-tree.events.on_folder_removed()*
on_folder_removed({handler})
                Registers a handler for when a folder is removed.

                Parameters: ~
                    {handler}    (function) Handler function, with the
                                 signature `function(payload)`.

 vim:tw=78:ts=8:noet:ft=help:norl:
